Westlake Pipe & Fittings 429020 2″ SKT Coupling

Description

Westlake Pipe & Fittings 429020 2″ SKT Coupling

The Westlake Pipe & Fittings 429020 2″ Coupling is an essential and highly versatile Schedule 40 PVC coupling engineered to provide reliable, leak-resistant connections between two 2-inch PVC pipe segments in a wide variety of fluid systems. Manufactured under Westlake Pipe & Fittings’ trusted quality standards (formerly under the LASCO brand), this coupling combines simple design philosophy with robust performance characteristics that make it a staple component in residential, commercial, industrial, irrigation, pool & spa, and agricultural piping systems.

A PVC coupling serves a basic but critical purpose in any piping network: it joins two lengths of pipe in a straight, continuous path. The 429020 model utilizes socket (SKT) connections on both ends, meaning that each end of the coupling receives the end of a standard Schedule 40 PVC pipe, and the joint is secured using solvent cement (commonly referred to as PVC glue). This method creates a chemical bond between the coupling and the pipe ends, resulting in a permanent, watertight connection that’s highly resistant to internal pressure, vibration, and environmental stressors.

Unlike more complex fittings — such as reducers, elbows, or tees — a coupling’s role is straightforward: it extends, repairs, or reinforces straight runs of pipe. When properly installed, a coupling like the 429020 becomes an integral part of the piping system, indistinguishable in performance from the pipes it connects.

The 429020 coupling is made from rigid Polyvinyl Chloride (PVC), one of the most widely used thermoplastic materials in modern piping systems. PVC’s popularity stems from its combination of strength, corrosion resistance, low cost, and chemical stability. It does not rust, scale, or degrade when exposed to most acids, bases, salts, or organic solvents — a major advantage over traditional metal fittings, especially in water, wastewater, pool, and irrigation environments.

Manufactured via injection molding, the coupling exhibits uniform wall thickness, smooth inner bores, and precise dimensions that comply with Schedule 40 standards and industry specifications such as ASTM D1784 / D2466. These standards ensure that the coupling fits seamlessly with other Schedule 40 PVC components and delivers predictable performance throughout its service life.

The 429020 coupling is designed for use in Schedule 40 PVC systems, which are known for balancing mechanical strength and light weight. Schedule 40 PVC fittings and pipes are rated for pressure and non-pressure applications such as potable water distribution, irrigation, pool plumbing, and general fluid conveyance, provided the fluid temperature does not exceed approximately 140°F (60°C).

Installing this coupling involves preparing the pipe ends — typically cutting them square, deburring rough edges, and cleaning them with a recommended PVC primer. Solvent cement is then applied both inside the socket and around the pipe end. The pipe is fully inserted into the coupling and held for the initial cure time, typically a matter of seconds to minutes, depending on temperature and humidity. Once cured, the joint is chemically fused and ready for system pressure.

Proper installation contributing to a high-strength joint is essential because it ensures long-term performance without leaks or failures. Contractors and installers rely on the coupling’s repeatable fit and consistent dimensions to achieve reliable field results with each use.This 2″ socket coupling is intended for use in applications where the conveyed fluid’s temperature remains below approximately 140 °F (60 °C) — a typical upper limit for PVC fittings. Within this range, the material maintains dimensional stability and mechanical integrity, preserving a leak-free seal over extended service life.

Westlake Pipe & Fittings is dedicated to helping contractors maximize efficiency and helping engineers design systems that entire communities can rely on.With manufacturing & distribution centers across North America, dedicated sales, technical services, specification engineers and customer support teams, our unparalleled service allows you to design, specify and install complete projects with confidence.

Westlake Pipe & Fittings 429020 2″ SKT Coupling Features:

• Conforms to industry standards such as ASTM D2466 and typically regulated by NSF/ANSI 14/61
• Constructed from rigid PVC for corrosion resistance, chemical stability, and lightweight handling
• Manufactured to Schedule 40 dimensions ensuring compatibility with standard PVC pipe
• Suitable for potable water, irrigation, pool/spa, and general pressure piping systems
• 2″ Schedule 40 socket (SKT) coupling for joining two PVC pipe sections
• Smooth interior flow path minimizes pressure losses and turbulence
• Temperature rating up to ~140 °F (60 °C) in PVC applications
• Easy installation with standard solvent cement techniques
• Solvent-weld connections for strong, leak-resistant joints

Pool Warehouse

America's Favorite Pool Store, building backyard dreams since 1996!